I just built a genuine Spektrum DSM2 module (DM9, comes in a snap-in case for Futaba radios) into my Jeti DS-14 spare radio, to be able to easily bind and fly copters with an M4. Unfortunately the roll channel acts strange: The signal is jumping (in neutral position) between 0 and -25%, as you can see in the video below. It jumps in any stick position between the desired value and a lower value. The jumping frequency increases as I increase the update frequency so it is at least 50Hz.
I searched the web and this forum and found that it happened to someone else with the same module: .
Any idea if this problem can be fixed? The moduel works fine with any kind of Spektrum receiver. I also tested a normal DSM2 Sat with an AQ6 without problems.