Hexa, New Year, New Love

[chschmid]

All the files needed are here


What exactly is not working?
What parts do you have/use?

Cheers
Christof

[cofhal]

You zip LANC file have this files: LEDs,LANC,and Funtions. Three different sketch, if compiled independent errors occur I try compiler the sketch, funtions, and appear the following errors: all funtions in this scope not declared. Where declares all functions?so does the sketch LESD and LANC.

I need use the LAC for control my sony camara with my RC control.
I have understood to be a single sketch can be compiled.

[chschmid]

The sketch is LANC. Put all files in Folder named LANC.
Add the libs (LANC Libraries) to your arduino libraries.
Compile again.

[Lyuck]

Hello everyone,
I hope someone can help me, I uploaded the sketch on an Arduino Mini, which is connected to a receiver OrangeRx R615X and finally powered it all with a 1S lipo.
My problem is that it does not respond properly to commands, observing the status LED blinks do not match.
According to what you can depend on? What should I change?

Waiting for a help greet and thank

Luca

[chschmid]

Hi Luca
The Arduino Mini is 5V rated. Maybe you want use a 2s Lipo to power the Mini. Check if you have a Atmega 328 on it. The newer ones have. The Zoom PWM has to be centered for the other LANC functions to work.

Cheers
Christof

[enak]