bluuuHexa v3 (AutoQuad)

[bluuu]

It's time to describe my copter.
It will be good reference for testing, tunning and my questions

Some words:

- custom frame HEX+, 74cm between motors, 15cm diameter CP, Alu profiles 12x12mm
- FC AQ 6 rev.2 (FW 6.7 r100 now)
- ESC32
- T-Motor MT2814-10 (770kV)
- props APC 12x3.8 (but I think it's to large for that, will be changed RCTimer 11x5 carbon soon)
- futaba RC
- 2x5000mAh 4S LiPo
- weight RTF - 3,3kg (with gimbal, camera, additional lipo for gimbal etc)

Pictures soon.

[bluuu]

ok, time to rebuild ...

First .. frame.

General guidelines:
- alu 12x12 profiles
- Hex+ and Hex X on the same CP
- FC and GPS antenna protection
- ESCs under motors
- universal mounts for gimbal, battery, etc.

pic soon

[bluuu]

cnc

wycinanie.jpg (82.99 KiB) Viewed 40444 times

2D vision

[bluuu]

some pieces of G10

powycinane_male.jpg (189.87 KiB) Viewed 40408 times

[chschmid]

Nice, nice, nice...

Cheers
Christof

[afernan]

Where do you buy and cut the G10?
Thanks for the info
Angel

[bluuu]

My friend have cnc plotter. I don't know where he buys G10 but if you want I think he can cut some pieces for you.

[afernan]

Thanks bluuu, It's very kind from your side. For the moment I don't need, but for sure I'll consider your proposal.

Angel

[bluuu]

new pics:

arm1.jpg (197.86 KiB) Viewed 40331 times

ESCs covered by "plastik 70"

arm3.jpg (238.79 KiB) Viewed 40331 times

arm2.jpg (174.13 KiB) Viewed 40331 times

arm4.jpg (183.32 KiB) Viewed 40331 times

[bluuu]

Arms "family"

arms.jpg (251.68 KiB) Viewed 40309 times