AutoQuad Forum

by **trypt** » Fri Feb 15, 2013 10:03 pm

Got a few more parts. Soldered together 2 x 470uF 35v low esr capacitors for the ESC32s.

: ImageUploadedByTapatalk1360962189.043734.jpg (190.91 KiB) Viewed 29212 times

by **Jdmagoo** » Sun Feb 24, 2013 3:31 am

How's this going? Have you done more?

by **trypt** » Sun Feb 24, 2013 2:38 pm

Hey, not much new. Still waiting for more parts. Last thing I got was the 3DR radio which seems to work great (at least indoors)

: ImageUploadedByTapatalk1361713094.789982.jpg (221.56 KiB) Viewed 29185 times

by **Jdmagoo** » Tue Feb 26, 2013 9:58 am

Ok thanks,

I'm logging on each day to see your progress hopefully the parts arrive soon

by **trypt** » Mon Mar 04, 2013 10:50 pm

Got some more parts today

: ImageUploadedByTapatalk1362433597.958418.jpg (203.45 KiB) Viewed 29135 times

Engines unboxed

: ImageUploadedByTapatalk1362433620.334765.jpg (232.35 KiB) Viewed 29135 times

Soldered 5v jumper and FTDI header (lots of swearing) and flashed latest firmware on the ESC32s.

Hooked up one of the ESCs to a engine, Armed and started without problems, now im just waiting for the xoar 13x5 props to start calibrating.

: ImageUploadedByTapatalk1362433823.209556.jpg (214.7 KiB) Viewed 29135 times

by **Jdmagoo** » Tue Mar 05, 2013 7:05 am

Nice!!

What model t motors are they?

by **trypt** » Tue Mar 05, 2013 10:36 am

Tiger MT-4008-12 600kv's

, i had planned to buy tiger navigator MN3508-16 700kv, but noody had them in stock and I didn't want to wait anymore.

by **trypt** » Wed Mar 13, 2013 12:56 am

Today I mounted and soldered the ESCs and engines. Took a few hours but feels good to be done.

: ImageUploadedByTapatalk1363132476.074578.jpg (213.97 KiB) Viewed 29102 times

: ImageUploadedByTapatalk1363132491.610288.jpg (211.75 KiB) Viewed 29102 times

No the props are not mounted properly, only done for the photo

Size comparison

: ImageUploadedByTapatalk1363132521.264911.jpg (225.5 KiB) Viewed 29102 times

Also tested the one wire protocol for uploading esc settings, seems to be working

Now I'm waiting for spacers for mounting the AQ board.

by **leopold1** » Wed Mar 13, 2013 7:42 am

What a nice frame ;-)

How do you like the overall strength?

Eager to see it fly.

by **trypt** » Wed Mar 13, 2013 9:08 am

yeah it seems sturdy

me too!

Hexacopter build