Hi everyone!!!
In the ESC32v3 wiki: says "Producing a .bin file for flashing via USB (M4 and ESC32 v3)" also says "Select “bin” as Additional Output Format under Linker Options (be sure Project ‘autoquad’ is selected in Project Explorer window!)"... well I built the latest firmware esc32 I could find with CW (*.bin) and flashed into ESC32v3 with the AQ ECU tool without problems but after that I could not make the ESC32v3 work as before. ¿Do you know where I could download the latest firmware *.bin for the ESC32v3 or the source-code that belongs to ESC32v3 to build it again with CW?
many thanks