Thanks for the comments.
Menno
If you send me the drawings, I can cut you some parts till you get your own CNC.
Norbert
Thanks for the good wishes.
Your proposals where very logic but gave me a headache due to limitted space. While mounting the first ESC I felt like double lefthanded with twisted fingers and arms.
I selected a 1.5mm2 powerwire to keep the resistance as small as possible. But it is a bit thick to handle. Whats your best guess for the powerwire diam?
I planned to use a 2nd 330mF 35V low esr @ +- center of the powerline. Can I combine the 470(ESC) and 330(Powerline) or should I use the same capacity?
To see the leds I took the signalwires to the bottom.
Nice Idea with the acrylic standoff. I never cut that before but will give it a try.
Best
Christof