I´m trying to solve this yaw rebounds:
see this video : https://youtu.be/rz5-0_z42jQ
QUATOS log plots - YAW rebounds
4 posts
• Page 1 of 1
QUATOS log plots - YAW rebounds
by afernan » Tue Nov 08, 2016 8:34 pm
- Attachments
-
-
Last edited by afernan on Wed Nov 09, 2016 11:21 am, edited 1 time in total.
- afernan
- Posts: 1214
- Joined: Sat Jul 07, 2012 5:24 pm
- Location: Madrid, Spain
Re: QUATOS log plots
by afernan » Wed Nov 09, 2016 11:21 am
- afernan
- Posts: 1214
- Joined: Sat Jul 07, 2012 5:24 pm
- Location: Madrid, Spain
Re: QUATOS log plots - YAW rebounds
by Max » Sat Nov 12, 2016 11:10 pm
Angel, try setting Yaw Rate filter TAU to 0.07 (default is 0.01). This should help smooth out the bounce-back and restore the previous behavior (pre acro-mode changes). As you mentioned separately, lowering PROP_K1 may also help a bit... or just smoother yaw stick movement when releasing back to center.
-Max
-Max
- Max
- Posts: 2814
- Joined: Mon Aug 13, 2012 9:45 pm
- Location: Near Ithaca, NY, USA
Re: QUATOS log plots - YAW rebounds
by afernan » Sun Nov 13, 2016 9:52 am
Max:
yes I´ve tried to move up/down the Yaw-rate smooth (from 0.01 to 0.2): yaw behaviour efectively smooths but rebound remains in all cases.
yes I´ve tried to move up/down the Yaw-rate smooth (from 0.01 to 0.2): yaw behaviour efectively smooths but rebound remains in all cases.
- afernan
- Posts: 1214
- Joined: Sat Jul 07, 2012 5:24 pm
- Location: Madrid, Spain
4 posts
• Page 1 of 1
Return to Quatos Adaptive Control
Who is online
Users browsing this forum: No registered users and 10 guests