since I want to start a new quadrocopter build using M4 flight controller I'm selling the M4 QUATOS CamCruiser!
Here's what's inside:
Full-CFK CamCruiser foldable quad frame
ESC32V2 (connected to the M4 flight controller by CAN interface)
Tarot 4006 630kV (TL68P02) motors
Graupner e-Prop 12x6in
T-Motor CW/CCW (PA017 bzw. PA023) prop adapters
T-Motor CA006 8>6mm copper adpater
Autoquad M4V2 flight controller (red)
QUATOS Hobby License (up to 2.5kg AUW)
Spektrum TM1000 telemetry transmitter
Orange DSMX Sat receiver (receiver diversity with onboard RX)
Taoglas AGGP.35F.07.0060A (GPS+GLONASS) antenna
Mikrocopter GPS Shield V1.1
M4CAN M4 expansion board with CAN interface, custom PCB with WS2812B as orientation light, MAV2TELEM board for Spektrum/HOTT telemetry/lighting/dual DC/DC/ etc.
HC-06 Bluetooth Modul
Some pictures of the craft:
- Bottom view. Upper antenna is from TM1100, lower is from on-board RX
- Unfolded! Motor to motor distance is around 67cm
- Total weight without battery is 1494g
- Camera mounting plates with dampers
Flight videos:
Some more details/detail shots of the craft are in the build log: viewtopic.php?f=38&t=3958
The price for the RFT craft is 1.000EUR (shipping in Germany is included; shipping quotes on request)
Price without Spektrum components (TM1100 and Orange sat) is 950EUR (shipping in Germany is included; shipping quotes on request)
The craft is located in Dachau, Germany. If you want to see it flying before you buy just let me know; I'm sure we can work something out.