I'm using this motors with carbon propellers TM 1344 with QUATOS and EXC32V2.
They work well, with a very low vibration level (<1m/s2) but they do this "birdy" noise. Do any of you have some params set that works well?.
Attached the params I'm using
Angel
TAROT 4006 620 kv - params needed
5 posts
• Page 1 of 1
TAROT 4006 620 kv - params needed
by afernan » Tue May 24, 2016 4:15 pm
- Attachments
-
esc32.txt.zip- (569 Bytes) Downloaded 1072 times
- afernan
- Posts: 1214
- Joined: Sat Jul 07, 2012 5:24 pm
- Location: Madrid, Spain
Re: TAROT 4006 620 kv - params needed
by chschmid » Tue May 24, 2016 10:23 pm
I would have data for GRP 12x6 and T12x4 at 4s.
Cheers
Christof
Cheers
Christof
- chschmid
- Posts: 1800
- Joined: Wed Jul 11, 2012 7:41 pm
- Location: Herrliberg, Switzerland
Re: TAROT 4006 620 kv - params needed
by afernan » Thu May 26, 2016 7:15 am
Hi Christoff:
yes, TM1240 propellers should be OK. Please, share the params you use.
Do you remember to get good performances? . I still have some "glitches" and not very smooth running with this motors. Nothing compared with the TMotor.
Regards
Angel
yes, TM1240 propellers should be OK. Please, share the params you use.
Do you remember to get good performances? . I still have some "glitches" and not very smooth running with this motors. Nothing compared with the TMotor.
Regards
Angel
- afernan
- Posts: 1214
- Joined: Sat Jul 07, 2012 5:24 pm
- Location: Madrid, Spain
Re: TAROT 4006 620 kv - params needed
by aBUGSworstnightmare » Thu Jun 02, 2016 8:17 pm
- aBUGSworstnightmare
- Posts: 1460
- Joined: Fri Jun 22, 2012 5:24 pm
Re: TAROT 4006 620 kv - params needed
by afernan » Thu Jun 02, 2016 10:40 pm
- afernan
- Posts: 1214
- Joined: Sat Jul 07, 2012 5:24 pm
- Location: Madrid, Spain
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests