I Use CrossWorks 3.3 problem can't found stm32f4xx.h.

Info and discussion about the original AQ v6 flight controller

I Use CrossWorks 3.3 problem can't found stm32f4xx.h.

Postby tevada2010 » Mon Jan 11, 2016 3:36 am

I Use CrossWorks 3.3 problem can't found stm32f4xx.h: No such file or directory. I done follow this viewtopic.php?f=31&t=3825&start=10. Help.
Image
tevada2010
 
Posts: 6
Joined: Tue Jul 03, 2012 10:48 am

Re: I Use CrossWorks 3.3 problem can't found stm32f4xx.h.

Postby sandmen » Mon Jan 11, 2016 6:26 am

AQ code is not ready to compile with the 3.3 !
sandmen
 
Posts: 997
Joined: Fri Jun 22, 2012 7:25 am

Re: I Use CrossWorks 3.3 problem can't found stm32f4xx.h.

Postby tevada2010 » Mon Jan 11, 2016 3:46 pm

tevada2010
 
Posts: 6
Joined: Tue Jul 03, 2012 10:48 am

Re: I Use CrossWorks 3.3 problem can't found stm32f4xx.h.

Postby Max » Mon Jan 11, 2016 5:20 pm

You need to look at the full compiler command line being used (this is an option in CW Output window, I forget if it is enabled by default but I think not). Then check if the correct path to the stm32 header file is actually passed to the compiler using an -I command-line switch. Eg. -I../path/to/targets/STM32/include

-Max
Max
 
Posts: 2814
Joined: Mon Aug 13, 2012 9:45 pm
Location: Near Ithaca, NY, USA


Return to AutoQuad 6 Flight Controller

Who is online

Users browsing this forum: No registered users and 19 guests

cron