Hi,
While I was testing the automated triggering function of AutoQuad using a gentwire USB2 Cable and CHDK script in my Canon S100, I did something wrong because now the QGC doesn't detect radio signals but the satellite is binding correctly and shows an incorrect number of battery cells, it's shows and incorrect voltage. The rest of the functions seems working properly.
I have connected the power cables of the gentwire cable to an 5V UBEC, the signal cable to the signal pin of 11 port and the USB connector to the camera. The output voltage of the UBEC was 5.2 Volts.
I would like to know what I did wrong and what I can do to repair the AQ board.
Thank you in advance.