Should the calculation be done again in a new place?

Latest News and Info about the AutoQuad development

Should the calculation be done again in a new place?

Postby zhlearnaq » Sat Oct 17, 2015 3:41 am

hello.
whether the calibration should be done again in a new place and why, dose anyone know that? Please. Recently, I took my aircraft to a new place(I know the Acc value have changed at that place) , it dosen't work well, when back, it works well again, the mag Declination and other value have be changed to local value, what may happened?
zhlearnaq
 
Posts: 43
Joined: Wed May 14, 2014 10:47 am

Re: Should the calculation be done again in a new place?

Postby zhlearnaq » Wed Oct 21, 2015 3:48 am

I have found the problem. The press height is too large. Does this mean that the aq can only work in specific height? Why no one reply to me? Anybody have sugguestions? Thanks very much.
zhlearnaq
 
Posts: 43
Joined: Wed May 14, 2014 10:47 am

Re: Should the calculation be done again in a new place?

Postby LPR » Wed Oct 21, 2015 4:42 am

The calibration of the FC only needs to be done once.

Inclination and declination should be changed to the values that are correct for your location.

Larry
LPR
 
Posts: 1323
Joined: Tue Jun 26, 2012 1:29 pm
Location: MN, USA

Re: Should the calculation be done again in a new place?

Postby zhlearnaq » Thu Oct 22, 2015 10:45 am

hello Larry
Thanks very much for your reply, I have changed the mag value and I have found the reason that the PRESSURE value is too small, but i don't know why this happen, dose this mean that aq can only work in Low altitude region?
zhlearnaq
 
Posts: 43
Joined: Wed May 14, 2014 10:47 am

Re: Should the calculation be done again in a new place?

Postby LPR » Thu Oct 22, 2015 12:38 pm

The pressure sensor has a very large range of pressure sensing so I would think that should not be a problem. I have not heard of any problems with high altitude flying.

Larry
LPR
 
Posts: 1323
Joined: Tue Jun 26, 2012 1:29 pm
Location: MN, USA

Re: Should the calculation be done again in a new place?

Postby zhlearnaq » Thu Oct 22, 2015 1:34 pm

How about flying in an area of three thousand meters above sea leavel? Have anyone had a successful flight in such area?
zhlearnaq
 
Posts: 43
Joined: Wed May 14, 2014 10:47 am

Re: Should the calculation be done again in a new place?

Postby whizz101 » Fri Oct 30, 2015 4:48 pm

I have done many flights with take-off's over 2500m with no problem. Wish i could offer some advise, it just has never been a problem.
whizz101
 
Posts: 83
Joined: Thu Oct 16, 2014 9:00 pm


Return to News

Who is online

Users browsing this forum: No registered users and 17 guests

cron