M4 Showcases

[kinderkram]

Or even better: the fw file!

[joebar.rc]

[Kisssys]

Hi Menno,

Perfect, I went to bed hoping this would be here. Save me a lot of time and I needed the changes you made. You might think about a M4 build until you get this all ported over to the main repo.

Thanks
Steve

[afernan]

@Menno:
at what release corresponds the files with your modification attached?
Thanks

Angel

[afernan]

This my small M4-N4-KISS-QUATOS (I call "Q6") that flies very very well.

Attached the params I use. Main data is the following
Motor-to-motor = 408mm
XMotor 2208 with 0845 HQ props. KISS 18A escs, w/o Caps. External Rx Spektrum satellite
Central plate Warthox with 3D printed end-fitting for arms (CF 16mm tube)
AUW = 725g with 2600 Lion battery , about 20min flight time

Enjoy

[Simson]

What kind of Lion battery are you using?

[afernan]

I use:

FAIR P-Ion, 3s (10.8 V) 2600 mAh 36€ , 200g weight
From: HaDi-RC Modellbau, <Info@hadi-rc.de>

I´m very happy with them. I use also 6000mA, 4S on my larger copter. Also very good.
Angel

[afernan]

Below another M4-N4 build using KISS and QUATOS. I got also very good flying after correct parameters tunning (attached)

Details are:
-190mm motor-to-motor
-234g AUW with 1000mA,3S battery
-TMotor MT1306 & 5x3 props
-Custom frame in 3DPrinted with material ABS-Carbon Fiber (from "Proto-Pasta", USA)
-using "aqv7.1.1852-hwv8.6-ext_esc.bin" with KISS and QUATOS

Still working on GPS configuration to get better performances. With this 12mm antena I get hAcc = 2.6 and vAcc= 2.3 while with the 35mm one I get 0.7 average (for best performances, those values should be <1)

Video promised
Enjoy
Angel

[JussiH]

Angel,

I am converting my Leora to Quatos....it uses 5*3 Gemfan props and MT1306

It looks like you are in fact using a 5*3 prop, can you confirm this? I would like to steal your A1 and A2 params....

[JussiH]

Angel,

Can you pls give an answer to my question?

Are you really using 3s with this....I would think that burns the motor?