Q9 - QUAD 520 QUATOS ESC32V3

Show us your flight videos and pictures of your aircrafts

Q9 - QUAD 520 QUATOS ESC32V3

Postby afernan » Sun Aug 30, 2015 8:34 pm

I want to show you my last build. This is a mid size quad using all last AQ developments onboard. I call "Q9".

The frame is full custom 3DPrinted parts, large diameters CF tube arms (25mm) all dimensioned for ultra-low vibration levels < 0.5m/s2, (no damping system used).
Main components are:
- AQ 6.1, DIMU 1.1 Quatos with r449
- ESC32V3 with v3.3.0
- Propulsion: MN3508 with TM1240

Performance in flight are very, very good. Super smooth flight mainly thanks to the low vibs level. Flight time are close to 30min with LiOn 6000mA,4S . PH uses 40watt, see images below only.

As usual I can share the files to print for any autoquader.
Enjoy
Angel
Attachments
Q9.jpg
IMG_20150830_181653.jpg
IMG_20150830_181653.jpg (82.52 KiB) Viewed 15554 times
IMG_20150830_183233.jpg
IMG_20150830_183320.jpg
2.JPG
1.JPG
Last edited by afernan on Mon Aug 31, 2015 8:06 am, edited 2 times in total.
afernan
 
Posts: 1214
Joined: Sat Jul 07, 2012 5:24 pm
Location: Madrid, Spain

Re: New build QUAD 520 QUATOS ESC32V3

Postby brat002 » Sun Aug 30, 2015 9:41 pm

Amazing as usually. Please share files :)
brat002
 
Posts: 191
Joined: Tue Apr 21, 2015 10:35 pm

Re: New build QUAD 520 QUATOS ESC32V3

Postby brat002 » Sun Aug 30, 2015 9:43 pm

And what is KV of these motors?
brat002
 
Posts: 191
Joined: Tue Apr 21, 2015 10:35 pm

Re: New build QUAD 520 QUATOS ESC32V3

Postby afernan » Sun Aug 30, 2015 9:56 pm

700kV. This combination MN3508 and TM1240 works very well and effitiently (only 40watt for hovering).

Please send me a PM with your Email to share the stl files for printing (can´t attach large files there)
afernan
 
Posts: 1214
Joined: Sat Jul 07, 2012 5:24 pm
Location: Madrid, Spain


Return to AQ Media Showcase

Who is online

Users browsing this forum: No registered users and 9 guests