Hi all I am having binding problems with my M4 v2 and a recently aquired used DX6i (no experience with DX6i either). Radio is set to the onboard number 8 and M4 restarted so it is in memory. The pads are jumpered for onboard radio.
When trying to bind with the DX6i in default dsm2 and dsmx I only get a sync A in AQC. When I go into the setting of the DX6i and select dsm2 only I get a sync a, sync b, 100% signal quality, and the yellow led on the M4 goes solid. I can also move all the controls and see a corresponding movement on QGC. HOWEVER the DX6i never indicates a bind. On a subsequent restart there is no bind either. Any ideas? I have also tried binding multiple times with several meteres distance between the tx and m4.
FYI that screenshot shows radio type as 8. I was playing with settings radio type is -1 and radio setup is 8.