Hey guys,
need your expertise with a problem I have when trying to use 3S Lipos on this Quad.
The Quad flies fine with 2S LiPos, but when I'm trying to fly with 3S - T-Motor 2206 should have no problem with 3S
- the motors get hot after 8-10s of flight time (nearly burning out!).
The video shows you a comparison when using 2S and 3S; listen to the sound of the motors when on 3S. Flown in manual only.
I think the KISS ESC are causing the issue there, so what's your opinion?
The firmware and parameter file is enclosed. Tare and mag calibration performed. PID controller.
- aqv7.0.r442.b1848-hwv8.5-ext_esc-vsense-pa6.bin.zip
- r442 firmware file - PA6 for voltage sensing - use with M4r5 only!
- (144.2 KiB) Downloaded 836 times
- PARAMS_m4r5_q300-kiss_0r1.txt.zip
- Complete parameter file
- (2.35 KiB) Downloaded 903 times
Any idea what's the route cause?
EDIT: Was out in the garden with the 'lil sucker, powered by my rotten 4000mAh 2S Lipo (which I'm using since 2-3 years for bench testing/development).
Wanted to let you know that this craft flies excellent on 2S (with the parameter set posted). O.K. will have to check the Log-files since throttle factor can be improved a little but it's ultra stable, very agil and fun too fly with. Sorry, no video from the first flight, but I'm re-charging the LiPo and try to capture the second one on uSD
Will check HK stock in EU warehouse for a suitable 2S LiPo too.
Joerg