UPDATE: IMPORTANT NOTE In case of KISS use:
I got awesom performances using KISS but it´s critical wrt frame design (allocation of natural frequencies of the build wrt excitation frequency of the propellers). KISS ESCs are used only with PID control. This is under development yet. We´ve discovered that under certain frame configurations high coupling with control can happen inducing high vibrations (> 1g) making impossible to fly. Tunning it´s possible but for an expert user. NOT recomended by newbies
Instead, use ESC32 (or other standard ESC withouth freewheelig)
_______________________________________________________________________________________
I want to show my last mount using KISS-18A ESC´s based on TERAMAX TankQuad (viewtopic.php?f=25&t=3599).
In summary: ABSOLUTELY AWESOM PERFORMANCES!
Super smooth flight, precise, free of vibrations and the best: a big pleasure to flight. This KISS joints perfectly with AQ board, no doubt on that. I don´t want to compare with ESC32 and QUATOS, but it´s really close performances.
Details of the build:
- TMotor 3110, 700kv + TM12x4 CF props
- KISS esc, 18A
- fw r429, DIMU1.1 (no quatos)
- frame: custom quad 610mm, monoblock full 3D printed, 16mm CF tube arms.
- 1175g (including FPV Tx & camera).
- Flight time:25+ min with 5000mA, 4S
Mounting of the KISS just below the motors. Used a 330uF cap inside the tube. So plenty of free space in between central plates for payload.
Keep tuned for video show.