there is something I just don't understand.
I flashed a new AQ6/DIMU1.1 with the "aqv6.7.r224.b1400-rev1.hex" firmware. Everything's fine.
As I would like to use the HOTT features I went on and flashed to "hott_dimu_r416_aq6r1". Now there is some strange behaviour. Or at least I don't understand. As you can see below the flashing procure had finished without an error.
- screen_20140918_a.tiff (163.39 KiB) Viewed 23759 times
Once I recycle the power of the AQ6 and connect the board to the qgc (OSX) it seems to be waiting forever for the "param list" Moreover, the qgc stops short of indicating the current firmware version. Is there anything I missed?
Comments really appreciated.
Cheers,
Stefan