SDIO WRITE error != SD_OK

[Jenne]

Hi,

now, I got my AQ6 But the problems already started...
When I connect it to QGroundControl (Linux), I got this error and no data. Flight display is working.
Is this a problem with the SD card? The SD card is a Samsung Pro class 10. FTDI is the one from Flyduino.

Thanks for help,
Jens

[Jenne]

I don't know why, but now the message is gone and I get data.

[chschmid]

Good to hear.

[Jenne]

mm, the message is back. it's only working without any SD-Card

[chschmid]

Does the card work on other devices? Is it formatted right? Whats the message? Did you check the wiki ?

[Jenne]

Yes the card works on other devices? The Card is 8GB and has FAT32. The message is:
(MAV 098) SDIO WRITE error != SD_OK

[Jenne]

Unfortunetely, I don't have any other class10 card at the moment. (I also tested a 16GB class 6 card and got the same message)

[LPR]

Jenne

Please read this info on which SD cards work best.

http://autoquad.org/wiki/wiki/getting-s ... ed-extras/

Larry

[Jenne]

Yes, I read this info and I bought a card from that list. I have the second one (the Samsung) but it doesn't work.

[LPR]

Jenne

Try using some alcohol to clean the contacts in the SD holder.

Larry