Hi,
just checked TARE function on r372.
It's only working when:
THROTTLE = LOW (0)
YAW = LOWER LEFT CORNER (-692)
PITCH = HIGH (+711)
ROLL = UPPER LEFT CORNER (-684)
DEBUG LED will be solid red when stick in these positions; HUD stops spinning and is perfectly level and working.
With PITCH in LOW position position the RADIO VALUES box show me -692.
Any commends?
I'm using a Spektrum AR9020 with two sats attached; the SRXL bus goes to the AQ6 (via custom cable; power supply comes from a motor output since onboard 3.3V LDO is not sufficient for powering AR9020+2x SAT + TM1000).
- AR9020 - SRXL-bus acting as 'diversity sat receiver'