Conducted further testing.
Flashed to aqv7.0.r360.b1673-rev0-dimu1.1.hex
Radio type parameter can be changed.
I've now tried to execute the TARE function (
http://autoquad.org/wiki/wiki/autoquad- ... s-upgrade/) --> nothing happens; HUD keeps spinning around!
- screenshot, running r360
Flashed to aqv7.0.r362.b1679-rev0-dimu1.1.hex
Radio type could be changed; TARE fails too!
Same for aqv7.0.r364.b1683-hwv6.0-dimu1.1.hex!
EDIT: loaded Jussi's IMU parameters (
viewtopic.php?f=42&t=3039&start=20#p20004) to the r364 board. Power Cycling the Board --> HUD works normal, but TARE is not possible. The error message 'DIMU: cannot read EEPROM parameters!' remains.
P.S. can somebody verify my radio settings were correct!