Hi,
I am somewhat confused about the firmware flashing instructions for the esc32 (http://autoquad.org/wiki/wiki/esc32/esc ... -flashing/). The instructions say to use the "Flashing and Setup" tab of the Autoquad main widget and then shows the aqv6.6.hex being uploaded (autoquad firmware). The "esc32 settings" tab also has a flash firmware button, but does not allow you to pick the firmware file to use. I am trying to directly flash the esc using the ESC32v20r49.hex file. I have the esc directly connected to my pc via a usb serial adapter. However, when I try to flash from "Flashing and Setup" tab I get the following error.
stm32flash - http://stm32flash.googlecode.com/
COM3: No error
Using Parser : Intel HEX
Using Parser : Intel HEX
Error device
Is it possible to flash the esc with its firmware individually? From the instructions it seems like I need to have the esc connected to autoquad and then flash with the autoquad firmware and then I am not sure how to upload the firmware for the esc.
Thanks