Page 1 of 1

No recording in live way point

PostPosted: Sat Jul 09, 2016 9:28 am
by plexus
Hi, i am using firm quatos R449 B 1852 hw 6.1 .

When I switch ch5 , the Poi is not recorded in live WP mode during flight.

In QGC the swtich is active.
Without quatos all is ok.
Need help, tks. :idea:

Alain

Re: No recording in live way point

PostPosted: Mon Jul 11, 2016 5:26 pm
by plexus
No replies ?

Is live way point is implemented in standard in firm R449 B1852 quatos or must be compiled ?
Alain

Re: No recording in live way point

PostPosted: Mon Jul 11, 2016 7:50 pm
by LPR
Alain

I looked at the firmware change list and I found this.

"7.1.1861 - Oct. 2, 2015 + Add live waypoint recording feature."

Looks like you need to try a newer FW.

I've been using FW 1897 and have been having good results

Summary of use of LWR:
- Tx switch for LWR selectable with NAV_CTRL_WP_REC on QGC (using new scheme!)
- Switch has two functions:
1) waypoint recording/skip: switch active for 1s = record waypoint or
2) skip to next wp if already in mission mode
- clear waypoints = left stick is down left, right stick is down right,
and flip WP rec/skip switch to active -- hold for at least 2s.
AQ will beep/blink and send a text message.
+ Add signaling events for waypoint reached, WP recorded, and WPs cleared."

Larry

Re: No recording in live way point

PostPosted: Tue Jul 12, 2016 1:52 pm
by plexus
Thanks Larry,
I will tried in few days because at that time my Hexa is destroyed by a big crash (Testing my hexa with 5 motors). I am rebuilding a new bird.

Alain

Re: No recording in live way point

PostPosted: Tue Aug 09, 2016 4:23 pm
by plexus
Hi Larry,
LWP run with the firm 1897.

Alain

Re: No recording in live way point

PostPosted: Tue Aug 09, 2016 10:06 pm
by LPR
Alain

Great!

Larry