by LPR » Mon Jul 11, 2016 7:50 pm
Alain
I looked at the firmware change list and I found this.
"7.1.1861 - Oct. 2, 2015 + Add live waypoint recording feature."
Looks like you need to try a newer FW.
I've been using FW 1897 and have been having good results
Summary of use of LWR:
- Tx switch for LWR selectable with NAV_CTRL_WP_REC on QGC (using new scheme!)
- Switch has two functions:
1) waypoint recording/skip: switch active for 1s = record waypoint or
2) skip to next wp if already in mission mode
- clear waypoints = left stick is down left, right stick is down right,
and flip WP rec/skip switch to active -- hold for at least 2s.
AQ will beep/blink and send a text message.
+ Add signaling events for waypoint reached, WP recorded, and WPs cleared."
Larry
Last edited by
LPR on Tue Aug 09, 2016 7:36 pm, edited 1 time in total.