DIMU fail or FW bug ?

Info & Discussions about good ole AQ6, taken to the next level.

Re: DIMU fail or FW bug ?

Postby bluuu » Wed May 13, 2015 1:09 pm

Did you MAG calibration (and save datas)? I see no values in your param file.
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: DIMU fail or FW bug ?

Postby Crizz » Wed May 13, 2015 3:28 pm

I did, but heck i dont know why it didnt save the values. Did it with the stick commands and seemed to work. what now ?

Cant dance with cables and have no long distance telemetry for my laptop to start and save by QGC.

Man , sometimes i hate that thing.....
Crizz
 
Posts: 211
Joined: Sat Aug 09, 2014 3:43 pm

Re: DIMU fail or FW bug ?

Postby bluuu » Wed May 13, 2015 3:30 pm

You can save values just by stick command !

http://autoquad.org/wiki/wiki/configuri ... libration/
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: DIMU fail or FW bug ?

Postby Crizz » Wed May 13, 2015 7:27 pm

i know that part of the manual, printed it out and did the whole described procedure - like i said, with the stick commands. I have no clue if the values stored are valid or crap. Anything is stored. But i cant hardly believe that a not propper calibrated mag would cause my problems.
Crizz
 
Posts: 211
Joined: Sat Aug 09, 2014 3:43 pm

Re: DIMU fail or FW bug ?

Postby chschmid » Thu May 14, 2015 5:00 am

Hi Crizz

If you have a link to QGC, you can see in the mavlink screen what your controller does. Including saving cal params.

Cheers
Christof
chschmid
 
Posts: 1800
Joined: Wed Jul 11, 2012 7:41 pm
Location: Herrliberg, Switzerland

Re: DIMU fail or FW bug ?

Postby aBUGSworstnightmare » Thu May 14, 2015 6:56 am

Hi Crizz,

why not using Bluetooth and an Android (Handy/Tablet with 4.x) running Autoquad app. It will announce when calibration values were stored successfully.

Joerg
aBUGSworstnightmare
 
Posts: 1460
Joined: Fri Jun 22, 2012 5:24 pm

Previous

Return to AQ6 +DIMU +CAN

Who is online

Users browsing this forum: No registered users and 13 guests

cron