Page 1 of 1

DIMU +5V from serial connector

PostPosted: Fri Mar 27, 2015 11:48 am
by r0sewhite
I am missing the information about max mA load at the serial connector. Is it safe to power a Arduino Pro Mini or a Bluetooth HC-06 module from it? I would like to avoid wild west wiring with serial wires from the DIMU and power wires from the AQ board, if possible.

Re: DIMU +5V from serial connector

PostPosted: Fri Mar 27, 2015 1:11 pm
by aBUGSworstnightmare
r0sewhite wrote:I am missing the information about max mA load at the serial connector. Is it safe to power a Arduino Pro Mini or a Bluetooth HC-06 module from it? I would like to avoid wild west wiring with serial wires from the DIMU and power wires from the AQ board, if possible.


Hi Tilman,

5V were supplied via J1/J2, coming form the AQ6 Recoms, so no Problem to supply the Arduino/Bluetooth.

Joerg