Page 1 of 1

DIMU AQ6 and GCS serial communication error

PostPosted: Sat Oct 04, 2014 7:48 pm
by kylekyle
hi.

I have AQ6 with DIMU.
if I use non-dimu fw ( R422 ) I can connect GCS using FTDI and there is no problems.

but as soon as I use dimu fw ( R431 and sevral other builds ) I am having trouble to connect GCS.
it initially connects and shows HUD information but in 5~10 seconds after GCS crashes ( GCS hangs )

I tried GCS 1.5 1.4 1.3 they all shows similar problems..
I was able to capture mavlink log before it crashes...

can anybody point me where to look?

thank you

Re: DIMU AQ6 and GCS serial communication error

PostPosted: Sat Oct 04, 2014 8:11 pm
by kylekyle
I am trying to attach mavlink log file again.... just rename it with 123.mavlink

Re: DIMU AQ6 and GCS serial communication error

PostPosted: Sat Oct 04, 2014 9:04 pm
by JussiH
Disable serial hardware flow when you make the connection

Re: DIMU AQ6 and GCS serial communication error

PostPosted: Sun Oct 05, 2014 6:04 am
by kylekyle
it works.
thank you !!!