AQGC and Calibration with DIMU very hard !!!

Info & Discussions about good ole AQ6, taken to the next level.

Re: AQGC and Calibration with DIMU very hard !!!

Postby Max » Mon Apr 28, 2014 9:58 pm

I'm afraid I have to defer the calibration question to others who may have a clue.. :) Except to ask, did you check the DIMU checkbox in the calib GUI? And to say, you may need to post your log(s) somewhere for others to test out (zip 'em so they're smaller). I do know that in the past, the quality of the dynamic data could definitely affect the calculations (but you probably knew that already).

-Max
Max
 
Posts: 2814
Joined: Mon Aug 13, 2012 9:45 pm
Location: Near Ithaca, NY, USA

Re: AQGC and Calibration with DIMU very hard !!!

Postby plexus » Mon Apr 28, 2014 10:00 pm

I will see that to morrow . have a nice night.
Alain

File added , see up.
plexus
 
Posts: 534
Joined: Tue Jul 03, 2012 3:30 pm
Location: South of France

Re: AQGC and Calibration with DIMU very hard !!!

Postby sandmen » Tue Apr 29, 2014 11:34 am

Is the 003derniere-AQL.LOG, your dynamic log?
Please upload also your parameter file, you have created on the first step's.

What I can see, the dynamic log, is not too long :-)

What do you mean with " On step 2 and 3 the loop abort, on step 4 some ´NAŃ´????"
with loop aborted?


I did only a short check with your dynamic, if you switch on the DIMU check box, it should be fine.
But the dynamic dance is really short!
sandmen
 
Posts: 997
Joined: Fri Jun 22, 2012 7:25 am

Re: AQGC and Calibration with DIMU very hard !!!

Postby plexus » Tue Apr 29, 2014 8:27 pm

Hi,
003derniere-AQ.log is my dynamic log
and the 3 static log. The number 3 (horizontal) is that used and giving bad results

https://www.dropbox.com/s/8srt5ta2jkozl ... 042014.zip

You said the log is short, may be I must do a new dance slowly.
Step 2and 3 abort after some loops and step 4 finish but no values printed ( "NAN").

The dimu box was sticked.I am using the qgc 1.4 B.

May be you will see something wrong .
Thanks.
Alain
plexus
 
Posts: 534
Joined: Tue Jul 03, 2012 3:30 pm
Location: South of France

Re: AQGC and Calibration with DIMU very hard !!!

Postby plexus » Thu May 01, 2014 7:09 pm

After a lot of time to dance, my own parameters now seems to be good. The calculation is done well and the flight was very good wtih an very strong wind.
I upload a video to show you.
alain
plexus
 
Posts: 534
Joined: Tue Jul 03, 2012 3:30 pm
Location: South of France

Previous

Return to AQ6 +DIMU +CAN

Who is online

Users browsing this forum: No registered users and 19 guests

cron