AutoQuad Forum

Hi there,

just wondering what connector will fit the two holes on the CAN connectors pads on the DIMU. Prefer to have a connector than soldering directly.

Cheers

James

It is a 1.5mm pitch, the 'spektrum' type 2 pin connector / plug will fit
(Micro JST ZH 1.5 2-Pin Connector)

(BTW, make sure you have a very good cable, flexible and very crimped / soldered very good, it is now the only line to your esc's and you want to avoid any breaking there... don't ask me how I know )

Menno

I got mine from here ... although I bought mine to plug into the S.BUS connector on the AQ board. The part number sounds the same though:

Housing - http://uk.farnell.com/jsp/search/produc ... ku=3357557
Pre-terminated sockets with pigtails - http://uk.farnell.com/jsp/search/produc ... ku=2065425

Hope that helps

David

The female connector will be included in the future. We are also working on some soft silicone wires for CAN connections

I do have a few of the female connectors left here, so if you want one, I will ask you to pay the stamps to ship it: 3E for Europeans, 5E for the rest of the world. I dont have that many, so first come, first served.

James, I will throw a female connector into your package with tubes.