Morning Joerg
Check if the LOG_VOLTAGE0 to X are the same or not.
These are the raw values from the sensors anr they are used for the cal process.
#define ADC_VOLTS_RATEX 0
#define ADC_VOLTS_RATEY 1
#define ADC_VOLTS_RATEZ 2
#define ADC_VOLTS_MAGX 3
#define ADC_VOLTS_MAGY 4
#define ADC_VOLTS_MAGZ 5
#define ADC_VOLTS_TEMP1 6
#define ADC_VOLTS_VIN 7
#define ADC_VOLTS_ACCX 8
#define ADC_VOLTS_ACCY 9
#define ADC_VOLTS_ACCZ 10
#define ADC_VOLTS_PRES1 11
#define ADC_VOLTS_PRES2 12
#define ADC_VOLTS_TEMP2 13
#define ADC_VOLTS_TEMP3 14
Cheers
Christof