AutoQuad Forum

Joerg, mine does the exact same thing with r368. I'm currently running r357 and it saves the params OK. Haven't flown it yet though.

QGC 1.3.0 on Windows 7 x64.

Conducted further testing.
Flashed to aqv7.0.r360.b1673-rev0-dimu1.1.hex

Radio type parameter can be changed.
I've now tried to execute the TARE function (http://autoquad.org/wiki/wiki/autoquad- ... s-upgrade/) --> nothing happens; HUD keeps spinning around!

screenshot, running r360

Flashed to aqv7.0.r362.b1679-rev0-dimu1.1.hex
Radio type could be changed; TARE fails too!

Same for aqv7.0.r364.b1683-hwv6.0-dimu1.1.hex!

EDIT: loaded Jussi's IMU parameters (viewtopic.php?f=42&t=3039&start=20#p20004) to the r364 board. Power Cycling the Board --> HUD works normal, but TARE is not possible. The error message 'DIMU: cannot read EEPROM parameters!' remains.
P.S. can somebody verify my radio settings were correct!

I had to reverse my pitch channel before I could get TARE to work.

I can reproduce the failure.
I'm working on that topic.

Hi,

just tested aqv7.0.r371.b1702-hwv6.0-dimu1.1.hex; same result here!

This bug has been found and fixed in the repo trunk head.

The nightly build for r372 should then be online tomorrow:
ftp://ftp.autoquad.org/3/334693_22529/a ... erimental/

I just forced a build and new versions are up on FTP.

-Max

Hey guys,
Just wanted to confirm the r372 saves all the parameters with the Dimu installed.
The hud spins, but with the params.txt from Jussi thats fixed.
The tare command works!

Cheers,

Ray