DIMU with very short full calibration results

[chestnut]

Hi Joebar.rc

In step 3 it loop forever. What's wrong in here? I just add logger ADC_MAG_SIGN =1 for DMIU. If i don't add it, it's not run...

[joebar.rc]

You didn't do what I suggested:). You have to do that on the command line.
So, in qgroundcontrol\aq\bin you'll find the executables cal.exe and sim3.exe.

Run the cmd line I posted before..

[sandmen]

@chestnut
why you didn't use the DIMU checkbox?

@Menno, we should try to use the qgc. Or what is the reason for using commandline?

[chestnut]

[chestnut]

[sandmen]

Are you sure, you using a old one?
1.3 RC 2.1 is the latest.
Short How-To.
1. add the static files from DIMU
2. add the dynamic files from DIMU
3. start the step's.
4. On some steps, you have to abort it by Hand, if the lowest values reached.
The latest cal & sim3 app's should print out the correct values after pressing abort button.
All other things are the same.

[chestnut]

[sandmen]

replace the cal & sim3 with this version.

removed sim & cal app, there is a problem
Need to fix it.

[Max]

To use the cal + sim3 Peter (sandmen) uploaded with QGC you also need to modify the cal_version.txt file in QGC install folder/aq/bin. Change the text of that file to "2.0" (w/out quotes).

Or just use the command line like Menno (joebar) suggests.

-Max

[joebar.rc]

The versions Peter released a couple of hours before are crashing in my tests. Peter did rebuild and I have now tested a new version that I'll attach.
Replace the sim3 and cal in the latest qgcs, edit the cal_version to 2.0 and all should be good now.

Thanks Peter!

ground (1).zip

(193.56 KiB) Downloaded 658 times

Menno