Hi
I'm working on custom code for M4. Up until now I didn't need to use radio so I didn't choose any radio option in QGC. At this point I have to make a couple of tests with radio connection using internal CYRF receiver. Unfortunatelly I experienced a problem. Compiled in CrossWorks code worked great until I changed "Radio Type (RC1)" in QGC from "No radio" to "CYRF (onboard M4v2+)". After writing changed parameters to flash and restarting a board only red power LED lighten up. It's possible to connect the board to QGC but it seems like no data is transfered between a board and a computer.
I made some changes to the code so my first thought was that it's the source of a problem. Unfotunatelly after trying the clean code compiled straight from the repository the same problem occured after changing radio option to CYRF. It's probably everything ok with a board because I can flash the firmeware from "Download wizard", change a radio option to CYRF and everything goes back to working perfectly.
Did anybody experienced similar problem?