Re: KISS ESC problem
Posted: Tue Sep 15, 2015 6:20 am
AutoQuad Forum
AutoQuad :: Autonomous Multi Rotor Vehicle Controller
http://forum.autoquad.org/
KISS ESC problem
Page 2 of 2
Posted: Tue Sep 15, 2015 6:20 amRe: KISS ESC problem
Posted: Tue Sep 15, 2015 7:28 amYou are not right. It is Kiss ESC problem!
Re: KISS ESC problem
Posted: Tue Sep 15, 2015 10:50 amRe: KISS ESC problem
Posted: Tue Sep 15, 2015 11:55 amIt was a joke 
Documentation does not has "Quick how to". It can be the problem for beginers.
Documentation does not has "Quick how to". It can be the problem for beginers.
Re: KISS ESC problem
Posted: Fri Sep 18, 2015 5:23 amthanks for the helpful suggestions guys!
this m4 board was on another smaller quad (with KISS escs working fine) but i wanted to try it on a quad with bigger motors. I only soldered one ESC to test my connection and motor direction when i got the weird sync problem.
this m4 board was on another smaller quad (with KISS escs working fine) but i wanted to try it on a quad with bigger motors. I only soldered one ESC to test my connection and motor direction when i got the weird sync problem.
Re: KISS ESC problem
Posted: Fri Sep 18, 2015 5:37 amI am using the N4 expander so the ADC is connected to that board with two wires. I do not see where it says to change DEFAULT_SPVR_VIN_SOURCE param if using the N4.
Re: KISS ESC problem
Posted: Fri Sep 18, 2015 5:42 amHere: