Pre-crimped wires with Molex Picoblade connector

Info and discussion about the autonomous Micro FC, suitable for nanos, micros and mini multirotors

Pre-crimped wires with Molex Picoblade connector

Postby aBUGSworstnightmare » Mon Mar 09, 2015 2:35 pm

Hey guys,

as you know the M4 is delivered with 4 sockets for the onboard Motor connectors. They are from MOLEX Picoblade series (http://www.molex.com/pdm_docs/sd/510210700_sd.pdf) .

The mating housing should be Molex 0510210200 (Digikey WM1720-ND), but since I don't want to crimp the cables by myself I'm looking for a source were I could by (cheap) pre-crimped wires (or even completed with the 2-pin connector housing).
Molex-PicoBlade.jpg


Does anybody of you know a source?

Rgds
Joerg
aBUGSworstnightmare
 
Posts: 1460
Joined: Fri Jun 22, 2012 5:24 pm

Re: Pre-crimped wires with Molex Picoblade connector

Postby LPR » Mon Mar 09, 2015 3:22 pm

Joerg

I did not use these to build the Nylon quads. Takes too long to get from China to US but if you don't mind the cheap wire, these should work.

http://www.ebay.com/itm/20-SETS-Micro-J ... 234c823140

http://www.ebay.com/itm/Micro-JST-1-25- ... 19eecbfb5d

I do have a set of these coming. Need to get a crimping tool.

https://www.youtube.com/watch?v=27P1zVHokOU

Larry
LPR
 
Posts: 1323
Joined: Tue Jun 26, 2012 1:29 pm
Location: MN, USA

Re: Pre-crimped wires with Molex Picoblade connector

Postby aBUGSworstnightmare » Mon Mar 09, 2015 8:32 pm

Hi Larry,

thanks for the links; will sure get some.
Well, I want to make use of the onboard ESCs for signaling on the small quads. Since I still want to be able to swap the M4 between frames I would prefer to have connectors in place (instead of soldering the wire's directly).

Rgds
Joerg

P.s. I'm not in a hurry --> no problem to wait one month for them to show up!
aBUGSworstnightmare
 
Posts: 1460
Joined: Fri Jun 22, 2012 5:24 pm

Re: Pre-crimped wires with Molex Picoblade connector

Postby chschmid » Mon Mar 09, 2015 10:11 pm

chschmid
 
Posts: 1800
Joined: Wed Jul 11, 2012 7:41 pm
Location: Herrliberg, Switzerland

Re: Pre-crimped wires with Molex Picoblade connector

Postby JussiH » Tue Mar 10, 2015 10:24 am

Its a molex PicoBlade!
JussiH
 
Posts: 2103
Joined: Thu Jun 21, 2012 9:25 pm

Re: Pre-crimped wires with Molex Picoblade connector

Postby LPR » Tue Mar 10, 2015 1:20 pm

Joerg

I ordered these and they worked well for the five quads in the video and yes they are not the right ones but they seem work.

http://www.ebay.it/itm/Mini-Micro-1-25- ... 5d540bcd92


Larry
LPR
 
Posts: 1323
Joined: Tue Jun 26, 2012 1:29 pm
Location: MN, USA

Re: Pre-crimped wires with Molex Picoblade connector

Postby OlliW » Tue Mar 10, 2015 2:42 pm

there ain't no such thing as a JST 1.25

JST 1.25 is just the popular name for the molex picoblade, e.g. http://www.rcgroups.com/forums/showthread.php?t=1493712

the bottom line, when you order a JST 1.25 via e.g. ebay and such you'll get a molex picoblade
OlliW
 
Posts: 60
Joined: Sat Nov 01, 2014 3:08 pm

Re: Pre-crimped wires with Molex Picoblade connector

Postby Ecky » Wed Mar 18, 2015 7:42 pm

perhaps this one:
http://www.flikto.de/products/jst-jumpe ... e-assembly

Greatings
Christian
Ecky
 
Posts: 70
Joined: Wed Nov 21, 2012 11:11 am
Location: Germany, Bonn

Re: Pre-crimped wires with Molex Picoblade connector

Postby aBUGSworstnightmare » Wed Mar 18, 2015 8:16 pm

Ecky wrote:perhaps this one:
http://www.flikto.de/products/jst-jumpe ... e-assembly

Greatings
Christian

No, this is a JST PH series, 2mm pitch connector; used on the AQ6 as power connector
aBUGSworstnightmare
 
Posts: 1460
Joined: Fri Jun 22, 2012 5:24 pm

Re: Pre-crimped wires with Molex Picoblade connector

Postby aBUGSworstnightmare » Fri Mar 20, 2015 6:38 pm

O.K.! That was fast! Ordered on 09/03/15 (eBay) and received on 19/03/13 --> only 10 days from Hong Kong.
SANY0180.JPG

Quality looks good. Will now use them to add LEDs to the M4Q300 craft.
aBUGSworstnightmare
 
Posts: 1460
Joined: Fri Jun 22, 2012 5:24 pm

Next

Return to AutoQuad M4 Micro Controller

Who is online

Users browsing this forum: No registered users and 2 guests

cron