Pre-crimped wires with Molex Picoblade connector
Posted:
Mon Mar 09, 2015 2:35 pmby aBUGSworstnightmare
Hey guys,
as you know the M4 is delivered with 4 sockets for the onboard Motor connectors. They are from MOLEX Picoblade series (
http://www.molex.com/pdm_docs/sd/510210700_sd.pdf) .
The mating housing should be Molex 0510210200 (Digikey WM1720-ND), but since I don't want to crimp the cables by myself I'm looking for a source were I could by (cheap) pre-crimped wires (or even completed with the 2-pin connector housing).
Does anybody of you know a source?
Rgds
Joerg
Re: Pre-crimped wires with Molex Picoblade connector
Posted:
Mon Mar 09, 2015 3:22 pmby LPR
Joerg
I did not use these to build the Nylon quads. Takes too long to get from China to US but if you don't mind the cheap wire, these should work.
http://www.ebay.com/itm/20-SETS-Micro-J ... 234c823140http://www.ebay.com/itm/Micro-JST-1-25- ... 19eecbfb5dI do have a set of these coming. Need to get a crimping tool.
https://www.youtube.com/watch?v=27P1zVHokOULarry
Re: Pre-crimped wires with Molex Picoblade connector
Posted:
Mon Mar 09, 2015 8:32 pmby aBUGSworstnightmare
Hi Larry,
thanks for the links; will sure get some.
Well, I want to make use of the onboard ESCs for signaling on the small quads. Since I still want to be able to swap the M4 between frames I would prefer to have connectors in place (instead of soldering the wire's directly).
Rgds
Joerg
P.s. I'm not in a hurry --> no problem to wait one month for them to show up!
Re: Pre-crimped wires with Molex Picoblade connector
Posted:
Mon Mar 09, 2015 10:11 pmby chschmid
Sure it is Molex and not JST?
These might work for SH3.
Cheers
Christof
Re: Pre-crimped wires with Molex Picoblade connector
Posted:
Tue Mar 10, 2015 1:20 pmby LPR
Joerg
I ordered these and they worked well for the five quads in the video and yes they are not the right ones but they seem work.
http://www.ebay.it/itm/Mini-Micro-1-25- ... 5d540bcd92Larry
Re: Pre-crimped wires with Molex Picoblade connector
Posted:
Tue Mar 10, 2015 2:42 pmby OlliW
there ain't no such thing as a JST 1.25
JST 1.25 is just the popular name for the molex picoblade, e.g.
http://www.rcgroups.com/forums/showthread.php?t=1493712the bottom line, when you order a JST 1.25 via e.g. ebay and such you'll get a molex picoblade
Re: Pre-crimped wires with Molex Picoblade connector
Posted:
Fri Mar 20, 2015 6:38 pmby aBUGSworstnightmare
O.K.! That was fast! Ordered on 09/03/15 (eBay) and received on 19/03/13 --> only 10 days from Hong Kong.
Quality looks good. Will now use them to add LEDs to the M4Q300 craft.