Pre-crimped wires with Molex Picoblade connector

[aBUGSworstnightmare]

Hey guys,

as you know the M4 is delivered with 4 sockets for the onboard Motor connectors. They are from MOLEX Picoblade series (http://www.molex.com/pdm_docs/sd/510210700_sd.pdf) .

The mating housing should be Molex 0510210200 (Digikey WM1720-ND), but since I don't want to crimp the cables by myself I'm looking for a source were I could by (cheap) pre-crimped wires (or even completed with the 2-pin connector housing).

Does anybody of you know a source?

Rgds
Joerg

[LPR]

Joerg

I did not use these to build the Nylon quads. Takes too long to get from China to US but if you don't mind the cheap wire, these should work.

http://www.ebay.com/itm/20-SETS-Micro-J ... 234c823140

http://www.ebay.com/itm/Micro-JST-1-25- ... 19eecbfb5d

I do have a set of these coming. Need to get a crimping tool.

https://www.youtube.com/watch?v=27P1zVHokOU

Larry

[aBUGSworstnightmare]

Hi Larry,

thanks for the links; will sure get some.
Well, I want to make use of the onboard ESCs for signaling on the small quads. Since I still want to be able to swap the M4 between frames I would prefer to have connectors in place (instead of soldering the wire's directly).

Rgds
Joerg

P.s. I'm not in a hurry --> no problem to wait one month for them to show up!

[chschmid]

Sure it is Molex and not JST?
These might work for SH3.

Cheers
Christof

[JussiH]

Its a molex PicoBlade!

[LPR]

Joerg

I ordered these and they worked well for the five quads in the video and yes they are not the right ones but they seem work.

http://www.ebay.it/itm/Mini-Micro-1-25- ... 5d540bcd92


Larry

[OlliW]

there ain't no such thing as a JST 1.25

JST 1.25 is just the popular name for the molex picoblade, e.g. http://www.rcgroups.com/forums/showthread.php?t=1493712

the bottom line, when you order a JST 1.25 via e.g. ebay and such you'll get a molex picoblade

[Ecky]

perhaps this one:
http://www.flikto.de/products/jst-jumpe ... e-assembly

Greatings
Christian

[aBUGSworstnightmare]

[aBUGSworstnightmare]

O.K.! That was fast! Ordered on 09/03/15 (eBay) and received on 19/03/13 --> only 10 days from Hong Kong.

Quality looks good. Will now use them to add LEDs to the M4Q300 craft.