Calibrate KISS ESC's using M4?

Info and discussion about the autonomous Micro FC, suitable for nanos, micros and mini multirotors

Calibrate KISS ESC's using M4?

Postby axelnied » Wed Feb 25, 2015 11:48 pm

This may be a stupid question, BUT:
Is there a way to calibrate the KISS ESC's (or any other ESC for that matter) with the ESC's connected to the M4 and using the internal Spektrum receiver? Or do I have to connect each ESC at a time to my AR8000 receiver?
axelnied
 
Posts: 262
Joined: Wed Jul 04, 2012 5:51 pm
Location: San Diego, CA, USA

Re: Calibrate KISS ESC's using M4?

Postby bluuu » Thu Feb 26, 2015 12:09 am

You can use Menno's custom firmware to make parametrical calibration.
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: Calibrate KISS ESC's using M4?

Postby axelnied » Thu Feb 26, 2015 4:58 am

You lost me at "custom firmware"... :lol:
I will do the standard stick calibration, I was just wondering if there was an option to bypass this!?
axelnied
 
Posts: 262
Joined: Wed Jul 04, 2012 5:51 pm
Location: San Diego, CA, USA

Re: Calibrate KISS ESC's using M4?

Postby bluuu » Thu Feb 26, 2015 8:50 pm

I think about Menno's firmware:

ftp://ftp.autoquad.org/3/334693_22529/a ... -MAV2HoTT/

Description is inside the archive.
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: Calibrate KISS ESC's using M4?

Postby Kisssys » Thu Feb 26, 2015 9:18 pm

If you have Menno's code onboard this video shows you how to do motor calibration.
[youtube]/watch?v=oyQVnpErigo[/youtube]
Steve
Kisssys
Kisssys
 
Posts: 1340
Joined: Sat Jun 23, 2012 9:23 pm


Return to AutoQuad M4 Micro Controller

Who is online

Users browsing this forum: No registered users and 6 guests

cron