Help!
M4v2 with ladybird reference parameters.
Tried internal receiver.Closed solder bridge..etc and orange ED shows binding but it won't arm.
This was using Devo 7e tx with deviation 4.
Got hold of an Orange tx (dsm2) and connected Orange satellite rx (after unbridging the jumper). Same thing..LED solid yellow but can't arm.
GCS shows radio is working OK.
Paramaters are straight from the AQ site.
Please..is there some way of forcing binding without the "throttle down and right" sequence? At this stage I'm completely frustrated and just want to know if the board works and motors will spin.