by aBUGSworstnightmare » Mon Jun 08, 2015 11:32 am
Before you start to dismantle your craft you should adjust the PWM values!
I have used SimonK (HK Blue series ESC) with the values below:
Arm: 1050
Min PWM: 1065
Starting PWM: 1110
Max PWM 1950
Find them on the MISC SETTINGS tab.
Values can vary for your setup, because of different motor/prop size/ESC. But they should give you an idea what to start with. KISS will also work with These Settings, but you usually can go lower with ARM/MIN/START values.
Did not read the whole tread, but: be sure to Flash your M4 with a Firmware for EXTERNAL ESCs! Otherwise you can adjust whatever Parameter you want and your Motors will not spin...