N4 expansion boards for BLDC

[Teletubbie]

My N4 exp. BT blinking pattern, working oke.

If you have a BT module from Viacoter, it presents it as Viacopter BT, password 1234

Video blinking LED (updated);
http://youtu.be/6DHrKd0xZPY

[el-dentiste]

hi Frank

did u close the pads on the upper side of the board to get power to the bT modul??
http://autoquad.org/wiki/wiki/m4-microc ... d/?lang=de

mine arrive yetserday. thanks a lot Jussi great work. bt work;)
but i miss the m2 nuts . so i will take some normal m2 nuts . with some little "nagellack" as thread lock. no problem.

[aBUGSworstnightmare]

[el-dentiste]

hi Joerg

yes u are right , if u will mount by urself u have to take care not to broke a part from the pcb. but it was not abig thing

(did u use some of teh decals )

[fseider]

I' ve soldered the Pads on the upper side. Everything works fine, only BT not...

[el-dentiste]

hi frank
is there any led blinking or something else ?! or only not binding with ur phone or pad?




Jussi,
is there the possibility to get a pin for graupner telemetry??? when yes, where??:)
to make BT switchable is not the big problem with some little wires and y tiny mechanicel switch between the two power pins for BT

[fseider]

Hi,

no LED is blinking! But the rest of the board is OK!

[Teletubbie]

Beter video uploded, show all sides of the board (LED's) , Disconnected & Connecting.

http://youtu.be/6DHrKd0xZPY


//Frank

[OlliW]

EDIT: Ok, reenginered the electronic scheme of the N4 which answered my questions post thus obsolete



THANKS
Olli

[JussiH]

Olli, You´re welcome.....

The board can be configured with a resistor divider (R2 and R3) to make it work with a V1 beta board. But the standard configuration is set up for V2, and in that case only R2 is populated with a 0.25W zero-resistor.

People,
It has come to my attention that a number of Kits have been shipped without the brass insert nuts. That is a mistake on our behalf, and we will ship the missing nuts to everyone that bought a kit over the coming days.

I am sorry for any inconvenience this may have caused.