Page 1 of 1

aq m4 motor output Abnormal

PostPosted: Tue Feb 17, 2015 2:49 am
by nkstark
Hallo everybody,
i have tested aq m4 Several days.Although i flight with aq 6before, but aqm4 did not so easy to use as i think.
the problem is the strange output(see the picture below).But the IMU,UKF seems work well.
Test Conditions:
aq m4v2 with all PID firmware(with default PID Parameter).
problem Description:
aq m4 stay in static.Armed.The green LED changed form solid into 5hz blinking.The motor output oscillate with solid frenquency and huge Amplitude.
What's wrong with my aqm4?

Re: aq m4 motor output Abnormal

PostPosted: Tue Feb 17, 2015 8:52 am
by JussiH
You probably havent hooked up the voltage sensing circuit on the M4...

Details here:

http://autoquad.org/wiki/wiki/m4-microc ... onitoring/