130mm micro FPV w/GPS build

Info and discussion about the autonomous Micro FC, suitable for nanos, micros and mini multirotors

Re: 130mm micro FPV w/GPS build

Postby LMD » Thu Feb 05, 2015 9:06 am

The frame is this one: http://micro-motor-warehouse.com/collec ... on-micro-h
and the camera is the Spektrum Ultra Micro FPV Camera.
LMD
 
Posts: 4
Joined: Tue Feb 03, 2015 10:50 pm

Re: 130mm micro FPV w/GPS build

Postby Kisssys » Sun Feb 08, 2015 10:21 pm

The 130mm frame looked nice so I put one together. My Quatos numbers are attached. Board is inverted, rotated -90 and the top slot is cut out to accept a Kisssys expansion board. I used the top of a Ladybird frame glued to the bottom to attach the M4.

The frame is not very rigid but fly's ok.

Cheers
Steve
20150208_150739.jpg

20150208_150716.jpg

20150208_093846.jpg
Attachments
MicroMotorH.txt
(9.55 KiB) Downloaded 112 times
Steve
Kisssys
Kisssys
 
Posts: 1340
Joined: Sat Jun 23, 2012 9:23 pm

Re: 130mm micro FPV w/GPS build

Postby LMD » Tue Feb 10, 2015 10:45 am

Thanks for the settings Steve ! I will test them as soon as I come back to home. I'm traveling for my job this week.
Cheers.
Laurent.
LMD
 
Posts: 4
Joined: Tue Feb 03, 2015 10:50 pm

Re: 130mm micro FPV w/GPS build

Postby Teletubbie » Tue Feb 17, 2015 4:35 pm

I made the same.

Here is a video from the first test flight;

http://youtu.be/5IamyqEI0E4

Now adding GPS antenna and BT for mission flight.

//Frank
(sorry for the phone quality)
Attachments
IMG_20150217_170530.jpg
IMG_20150217_170429.jpg
IMG_20150217_165944.jpg
Bare. Now adding GPS and Cam
Teletubbie
 
Posts: 162
Joined: Wed Jun 27, 2012 4:59 am
Location: Amsterdam, The Netherlands

Re: 130mm micro FPV w/GPS build

Postby Teletubbie » Wed Feb 25, 2015 8:22 am

72Gram, 4min flying time.
Attachments
IMG_20150225_082303.jpg
IMG_20150225_081724.jpg
IMG_20150225_081708.jpg
Teletubbie
 
Posts: 162
Joined: Wed Jun 27, 2012 4:59 am
Location: Amsterdam, The Netherlands

Previous

Return to AutoQuad M4 Micro Controller

Who is online

Users browsing this forum: No registered users and 2 guests

cron