First Steps with Quatos on Ladybird-M4 ?

[kinderkram]

No glue needed. But you do have the yellow tape removed?
http://autoquad.org/wiki/wiki/m4-microc ... ure-Sensor

[Crizz]

mine came w/o any tape on it, but i dont mind Duke you are right - have done the same meanwhile, but fixed it with one drop CA at the frame to avoid from getting lost.

Thanks for the link for Quatos calibration and airframe geometrie - havent seen it before, seems i´m getting to old for this job Will check tomorrow, actually i fight against the ESC32 , will post in the ESC32-section what i need actually

[Mullet]

I used a small piece of scotch tape and folded it over to get the foam to adhere to the M4's barometer. Not sure if this is the right way to do it or not. Perhaps, it wouldn't be the best idea because it might prevent the barometer from breathing.