Error "No DFU capable USB device found" solved.

Info and discussion about the autonomous Micro FC, suitable for nanos, micros and mini multirotors

Re: Error "No DFU capable USB device found" solved.

Postby ravenhaven » Mon Mar 16, 2015 11:28 am

It was not possible to update firmware for my M4V2 using the dfu-util that comes with the latest version of ground control. I replace the dfu-util with the one from the link in dropbox that Kinderkran posted and successfully updated to latest firmware.Thank You
Wally
ravenhaven
 
Posts: 13
Joined: Sun Mar 02, 2014 11:46 pm
Location: Perth AU

Re: Error "No DFU capable USB device found" solved.

Postby kinderkram » Sun Mar 22, 2015 9:47 am

The alternative DFU util for Intel USB3 chipsets is also available in our DL section:
http://autoquad.org/software-downloads/?did=158

Use at your own risk.
kinderkram
 
Posts: 2911
Joined: Fri Jun 22, 2012 7:47 am

Previous

Return to AutoQuad M4 Micro Controller

Who is online

Users browsing this forum: No registered users and 5 guests

cron