Hello,
I'm having some problems with my new set up. I have swapped from a AQ6 to an M4 with with Jorgs 0r3 board.
The problem i have is this;
I am running a Hexa and have thus "hacked" on to the M4 to get motor ports 1-4. The two motors that i have running on ports 3 and 4 are working fine, but the 4 motors i have connected to ports 4-8 on the expansion board do not work when i connect a battery. If i connect to QGC and restart the board then normally the ports 4-8 start working. sometimes it takes a couple of resets.
I have tried changing the pwm points for the esc's and recalibrating the esc's, but this has no effect.
I suspect it has something to do with the esc's. When using this setup with my AQ6 I had a similar problem. When i connected the battery the esc's world not work straight away, i would have to hit the reset button on the AQ6 after connecting the battery, then everything worked fine.
However, there is no reset button on the M4. And there is no reset button on the andriod app, so this is a real problem as soon as i leave my laptop.
What bugs me is that the two esc's connected to the two hacked ports 3 & 4, work perfectly every time i connect the battery! What is the difference as far as the esc's are concerned between the ports on the expansion board and the ones i have hacked from the M4?
Has anyone else experienced this? Would it be possible to add a reset button on the M4 like AQ6 has?
Any idea's appreciated!
Tristan.