Frame: oem 250 class carbon frame
Motors: RCTImer 1806 2300kV
These motors makes some noise to frame so i printed rubber nuts.
- rubber.jpg (110.54 KiB) Viewed 22461 times
AQ racer
11 posts
• Page 1 of 2 • 1, 2
AQ racer
by bluuu » Wed Jun 24, 2015 11:21 am
I have some unused parts so ... let's make 250 class AQ racer
Frame: oem 250 class carbon frame
Motors: RCTImer 1806 2300kV
These motors makes some noise to frame so i printed rubber nuts.
Frame: oem 250 class carbon frame
Motors: RCTImer 1806 2300kV
These motors makes some noise to frame so i printed rubber nuts.
- bluuu
- Posts: 1339
- Joined: Mon Oct 29, 2012 8:02 pm
- Location: Poland, Silesia
Re: AQ racer
by chschmid » Wed Jun 24, 2015 12:25 pm
- chschmid
- Posts: 1800
- Joined: Wed Jul 11, 2012 7:41 pm
- Location: Herrliberg, Switzerland
Re: AQ racer
by bluuu » Wed Jun 24, 2015 1:15 pm
i tried it on first version of QToy
Total effect isn't spectacular but the result was about 0.3mm/s^2 better (top at 2mm/s^2) (acc) then w/o.
Total effect isn't spectacular but the result was about 0.3mm/s^2 better (top at 2mm/s^2) (acc) then w/o.
- bluuu
- Posts: 1339
- Joined: Mon Oct 29, 2012 8:02 pm
- Location: Poland, Silesia
Re: AQ racer
by aBUGSworstnightmare » Wed Jun 24, 2015 2:01 pm
Adam, keep us posted!
Altix, who is using the M4BLDC on such a frame posted this one on FPVC
Altix, who is using the M4BLDC on such a frame posted this one on FPVC
- aBUGSworstnightmare
- Posts: 1460
- Joined: Fri Jun 22, 2012 5:24 pm
Re: AQ racer
by bluuu » Wed Aug 05, 2015 12:31 pm
What can i say .... it works
I post some details soon
I post some details soon
- bluuu
- Posts: 1339
- Joined: Mon Oct 29, 2012 8:02 pm
- Location: Poland, Silesia
Re: AQ racer
by Luxar » Wed Aug 05, 2015 7:36 pm
Woooh....Great stuff!!!
Greetings from Germany - Ralf
- Luxar
- Posts: 53
- Joined: Mon Dec 30, 2013 12:20 pm
Re: AQ racer
by bluuu » Tue Aug 11, 2015 3:09 pm
Some pics:
Don't look at RX antenna
it's a "whatever" to protect RF circuit in RX (LRS antenna is ordered).
Specification:
- RCT 1806 2300kV motors (balanced manualy)
- HQProp 5x4x3 proppelers (HQ is definitely not short of HighQuality - takes some time to balance)
- AQ M4v2
- N4 Expander (thanks Jussi )
- ESC32v3 (via CAN)
- RX - eLeReS (Polish LRS system, very useful - there is S.BUS (with onboard inverter), PPM and PWM selectable output
- VTX - 200mW 5.8GHz
- 700TVL CCD camera
With 1300mAh i'm getting about 5-7 minutes flight time. (i must try 1500, 1800mAh LiPo)
AUW is 538g
Don't look at RX antenna
it's a "whatever" to protect RF circuit in RX (LRS antenna is ordered).Specification:
- RCT 1806 2300kV motors (balanced manualy)
- HQProp 5x4x3 proppelers (HQ is definitely not short of HighQuality
- takes some time to balance)- AQ M4v2
- N4 Expander (thanks Jussi
)- ESC32v3 (via CAN)
- RX - eLeReS (Polish LRS system, very useful - there is S.BUS (with onboard inverter), PPM and PWM selectable output
- VTX - 200mW 5.8GHz
- 700TVL CCD camera
With 1300mAh i'm getting about 5-7 minutes flight time. (i must try 1500, 1800mAh LiPo)
AUW is 538g
- Attachments
-
rct1806_2300kv_hq5x4x3_3s.txt- ESC32v3 parameters
- (615 Bytes) Downloaded 987 times
-
- PARAMS_AQ250Racer.txt
- Full parameters
- (14.83 KiB) Downloaded 1044 times
-
- 250racer.xml
- Frame description file
- (1.83 KiB) Downloaded 1044 times
- bluuu
- Posts: 1339
- Joined: Mon Oct 29, 2012 8:02 pm
- Location: Poland, Silesia
Re: AQ racer
by bluuu » Mon Aug 31, 2015 10:33 am
- bluuu
- Posts: 1339
- Joined: Mon Oct 29, 2012 8:02 pm
- Location: Poland, Silesia
Re: AQ racer
by kinderkram » Mon Aug 31, 2015 11:38 am
Nice lil screamer! 
OSD is looking good, well done. Though it looks like there are some dropouts now and then...
OSD is looking good, well done. Though it looks like there are some dropouts now and then...
- kinderkram
- Posts: 2911
- Joined: Fri Jun 22, 2012 7:47 am
11 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 7 guests