AQ racer

Post your build logs here

AQ racer

Postby bluuu » Wed Jun 24, 2015 11:21 am

I have some unused parts so ... let's make 250 class AQ racer :)

Frame: oem 250 class carbon frame
Motors: RCTImer 1806 2300kV

frame.jpg


These motors makes some noise to frame so i printed rubber nuts.

rubber.jpg
rubber.jpg (110.54 KiB) Viewed 3769 times
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: AQ racer

Postby chschmid » Wed Jun 24, 2015 12:25 pm

bluuu wrote:These motors makes some noise to frame so i printed rubber nuts.


Hi Adam

I wonder how the result of that is. A while ago I experimented with some wild dampening constructions for Motors but never tried some out.

Cheers
Christof
chschmid
 
Posts: 1800
Joined: Wed Jul 11, 2012 7:41 pm
Location: Herrliberg, Switzerland

Re: AQ racer

Postby bluuu » Wed Jun 24, 2015 1:15 pm

i tried it on first version of QToy
Total effect isn't spectacular but the result was about 0.3mm/s^2 better (top at 2mm/s^2) (acc) then w/o.
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: AQ racer

Postby aBUGSworstnightmare » Wed Jun 24, 2015 2:01 pm

Adam, keep us posted!
Altix, who is using the M4BLDC on such a frame posted this one on FPVC

aBUGSworstnightmare
 
Posts: 1460
Joined: Fri Jun 22, 2012 5:24 pm

Re: AQ racer

Postby bluuu » Wed Aug 05, 2015 12:31 pm

What can i say .... it works :)

I post some details soon
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: AQ racer

Postby Luxar » Wed Aug 05, 2015 7:36 pm

Woooh....Great stuff!!!
Greetings from Germany - Ralf
Luxar
 
Posts: 53
Joined: Mon Dec 30, 2013 12:20 pm

Re: AQ racer

Postby bluuu » Tue Aug 11, 2015 3:09 pm

Some pics:

01-aqr.jpg


02-aqr.jpg


03-aqr.jpg


04-aqr.jpg


05-aqr.jpg


Don't look at RX antenna ;) it's a "whatever" to protect RF circuit in RX ;) (LRS antenna is ordered).

Specification:
- RCT 1806 2300kV motors (balanced manualy)
- HQProp 5x4x3 proppelers (HQ is definitely not short of HighQuality ;) - takes some time to balance)
- AQ M4v2
- N4 Expander (thanks Jussi :) )
- ESC32v3 (via CAN)
- RX - eLeReS (Polish LRS system, very useful - there is S.BUS (with onboard inverter), PPM and PWM selectable output
- VTX - 200mW 5.8GHz
- 700TVL CCD camera

With 1300mAh i'm getting about 5-7 minutes flight time. (i must try 1500, 1800mAh LiPo)
AUW is 538g
Attachments
rct1806_2300kv_hq5x4x3_3s.txt
ESC32v3 parameters
(615 Bytes) Downloaded 116 times
PARAMS_AQ250Racer.txt
Full parameters
(14.83 KiB) Downloaded 135 times
250racer.xml
Frame description file
(1.83 KiB) Downloaded 121 times
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: AQ racer

Postby bluuu » Thu Aug 27, 2015 10:34 pm

OSD mounted :)
I'll try to make some video tomorrow.
bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: AQ racer

Postby bluuu » Mon Aug 31, 2015 10:33 am

bluuu
 
Posts: 1339
Joined: Mon Oct 29, 2012 8:02 pm
Location: Poland, Silesia

Re: AQ racer

Postby kinderkram » Mon Aug 31, 2015 11:38 am

Nice lil screamer! 8-)

OSD is looking good, well done. Though it looks like there are some dropouts now and then...
kinderkram
 
Posts: 2911
Joined: Fri Jun 22, 2012 7:47 am

Next

Return to Build Logs

Who is online

Users browsing this forum: No registered users and 3 guests

cron