AutoQuad Forum

I have some unused parts so ... let's make 250 class AQ racer

Frame: oem 250 class carbon frame
Motors: RCTImer 1806 2300kV

These motors makes some noise to frame so i printed rubber nuts.

rubber.jpg (110.54 KiB) Viewed 22531 times

i tried it on first version of QToy
Total effect isn't spectacular but the result was about 0.3mm/s^2 better (top at 2mm/s^2) (acc) then w/o.

Adam, keep us posted!
Altix, who is using the M4BLDC on such a frame posted this one on FPVC

What can i say .... it works

I post some details soon

Woooh....Great stuff!!!

Some pics:

Don't look at RX antenna it's a "whatever" to protect RF circuit in RX (LRS antenna is ordered).

Specification:
- RCT 1806 2300kV motors (balanced manualy)
- HQProp 5x4x3 proppelers (HQ is definitely not short of HighQuality - takes some time to balance)
- AQ M4v2
- N4 Expander (thanks Jussi )
- ESC32v3 (via CAN)
- RX - eLeReS (Polish LRS system, very useful - there is S.BUS (with onboard inverter), PPM and PWM selectable output
- VTX - 200mW 5.8GHz
- 700TVL CCD camera

With 1300mAh i'm getting about 5-7 minutes flight time. (i must try 1500, 1800mAh LiPo)
AUW is 538g

OSD mounted
I'll try to make some video tomorrow.

Nice lil screamer!

OSD is looking good, well done. Though it looks like there are some dropouts now and then...