Hi,
ESC32 + Motor test will be done this weekend (hopefully). I will use the RCTimer 13x5.5 in the beginning (http://www.rctimer.com/product_920.html) on my MN3510-15 630KV (http://flyduino.net/Multikopter-Brushle ... avigator_3). My LiPos are those http://www.hobbyking.com/hobbyking/stor ... use_.html; well, not that cheap but I will exchange them to SLS in the near future.
I've used bullet connectors on every multicopter so far without problems; so I hope not to get in trouble with this one.
Well, will need to test the ESC32 placement in real life for shure. If they are making problems in the location I will relocate them to the aft compartment. Not my preferred position, but since I need the front compartment for the BLDC gimbal board there are not that many options.
Since my motors arrived today I didn't had the chance to conduct any 'real lit testings' so far.
Rgds
Joerg
aBUGSworstnightmare